Draw an oil sample to check for oxidation, thermal cracking, and viscosity changes. Dark, sludgy, or foul-smelling oil must be completely drained and replaced.
To keep your Wittmann Tempro Plus D 360 operating at peak performance, adhere to a strict preventative maintenance framework. Action Required Visual Inspections
The 5.7" color touch-screen includes a mold symbol that changes color based on the tolerance band: Green (within tolerance), Red (too hot), and Blue (too cold).
Solid State Relay (SSR) failed in the "closed" position; cooling water valve blocked. wittmann tempro plus d 360 manual exclusive
Utilizing the "circuits tab" for specific error codes or flow data.
Confirm correct pump rotation. Incorrect rotation will cause immediate cavitation, poor heat transfer, and potential pump damage.
However, I can outline what such a paper might include if you were to write one yourself, or I can help you locate the actual technical documentation. Draw an oil sample to check for oxidation,
Touch-screen microprocessor interface (Tempro Plus D)
If you describe the issue (error number, symptom), I can help interpret typical Wittmann Tempro behavior while you locate the full manual.
Optimum visibility and operation of the Tempro plus D. » Touch-screen The actual value and set point are displayed simultaneously. WITTMANN Group TEMPRO Plus D TCU - Proper Shutdown Procedure 7 Feb 2020 — Action Required Visual Inspections The 5
Frequently used operating modes can be accessed via touch fields at the bottom of the screen for rapid adjustments.
A built-in routine that utilizes compressed air or system reversal to blow water out of the mold before tool changes, ensuring a dry, safe workspace.
A crucial, often overlooked part of the is the detailed shutdown procedure. Improperly shutting down the unit can lead to premature component failure or heater damage. Proper Shutdown Workflow: