V2000-c Rfid Access Control User Manual

If you’d like, I can:

Use the rear plate of the enclosure as a template to mark drill locations for the wall anchors. V2000-c Rfid Access Control User Manual

In programming mode, press 2 + Swipe Card + # . If you’d like, I can: Use the rear

The V2000-C system is designed to be flexible and scalable, making it suitable for a wide range of applications, from small offices to large industrial complexes. The system can be configured to support multiple access levels, time zones, and holidays. The system can be configured to support multiple

In programming mode, press 1 + Swipe Card + # . Repeat for multiple cards.

Sets the authentication method to require BOTH a valid card AND a valid PIN code for entry.

If you forget the master code, power off the unit, short the specific jumper (often J2 or S16), then power it back on. The device will typically beep and flash to confirm initialization. Weatherproofing: