Usb Console Software 31 Ciscousbconsoledriver31zip Install !link! -

The is the essential software package needed to bridge this connection on Windows systems. Pre-Installation Requirements

It depends on the cable. If the cable contains its own USB‑to‑serial chip (e.g., Prolific PL2303 or FTDI), you may need the driver for that chip , not the Cisco driver. The Cisco driver described in this article is intended for Cisco devices that have a built‑in USB console port (usually a Mini‑B or Micro‑B connector). For a USB‑to‑RJ45 “blue cable” (Cisco part number ACS‑USB‑CONSOLE), the driver required is often the Silicon Labs CP210x driver.

Right-click setup(x64).exe (for 64-bit) or setup.exe (for 32-bit) and select . usb console software 31 ciscousbconsoledriver31zip install

: A Cisco device with a mini-USB console port and a USB Type-A to 5-pin mini Type-B cable .

: It is highly recommended to restart your computer after the installation finishes to ensure the drivers load properly. Connect Hardware The is the essential software package needed to

No. The USB console driver is available for free to anyone with a free Cisco.com account. While some advanced software downloads require a service contract, the USB console driver does not.

The file (sometimes also named Cisco_usbconsole_driver_3_1.zip ) is the version 3.1 driver package released by Cisco for its USB console ports and cables. It was originally published on January 20, 2010 and was designed to support Windows operating systems of that era, including Windows XP, Vista, 7, and 8. Inside the archive, you will find separate folders for 32‑bit ( Windows32 ) and 64‑bit ( Windows64 ) systems, each containing the appropriate setup executable ( setup.exe or setup(x64).exe ) and the driver files (INF files and binaries). The Cisco driver described in this article is

The file was small, barely a few kilobytes. He clicked download. In a folder on his desktop, the zip file appeared.

Locate CiscoUsbConsoleDriver31.zip in your downloads folder.