, plug the power cable back into the DVR.
Unplug the DVR and remove the from the motherboard. Wait 2–5 minutes, then reinsert it and power on.
If none of the default passwords work, the password was likely changed at some point. Do not worry; you still have several effective options to regain access.
A small, tactile push-button labeled RESET or RST .
Before diving into complex reset procedures, it is always worth trying the factory default credentials. Unless you specifically changed the password during the initial setup, one of these might still work:
Before trying complex resets, test the factory settings. Many Tronitek systems ship with simple, mirrored credentials. admin / Password: admin Username: admin / Password: 123456 Username: admin / Password: 000000 Username: admin / Password: (Leave Blank)
Fortunately, security systems are designed with recovery mechanisms. This comprehensive guide walks you through the step-by-step methods to recover, bypass, or reset a Tronitek DVR admin password and regain control of your security system. 1. Try the Factory Default Passwords First
If you have changed the password and forgotten it, or the defaults do not work, follow this guide to regain access to your system.
| Username | Password | Notes | Source | | :--- | :--- | :--- | :--- | | admin | admin | This is the most common default username and password combination for many devices, including SecurityTronix models. | | | admin | 888888 | This is listed as a default password in a Security Tronix quick start guide. | | | admin | 12345 | This is listed as a default password for SecurityTronix cameras on a technical resource site. | | | (no password) | (leave blank) | Some manuals specify that out of the box, the admin and default accounts have . | |
