Sinotimer Tm630s Manual 2021 Jun 2026

Repeat the time setting for when the device should turn off. button to save and exit. Yueqing Xinyang Technology Co., Ltd. 4. Wiring Diagram Basics sinotimer-tm-630a-operating-manual.pdf - pic-control

The output turns on immediately and stays on constantly, ignoring all programs.

A light (usually red) indicates when the output is active. Reset Button: Clears all settings.

Improper wiring can destroy the timer or cause an electrical short. The TM630S features four terminals clearly marked on the housing. sinotimer tm630s manual

Press to select the day combinations (e.g., individual days, weekdays only, weekends only, or all 7 days).

Once you are finished, press the button to save your settings and return to the home screen.

The Sinotimer TM630S is a highly versatile and feature-rich timer that has gained popularity among professionals and DIY enthusiasts alike. However, to unlock its full potential, it's essential to understand its operation and configuration. This article provides an in-depth look at the Sinotimer TM630S manual, covering its key features, setup, and usage. Repeat the time setting for when the device should turn off

(Reset/Recall): Lock/Unlock, reset programs, or recall settings. Manual (Auto/On/Off)Manual (Auto/On/Off) : Override the current program. Clock (Time)Clock (Time) : Return to the main clock display. 3. Initial Setup and Operation Before programming, you must prepare the timer. Step 1: Unlocking the Device If the screen is locked, press the button 4 times to unlock the keypad. Step 2: Resetting the Timer

Connect the neutral wire from your main power source here.

CR2450 Lithium battery (retains clock and program settings during power outages). Average Error: Less than 2 seconds per day. 🔌 Wiring and Installation Reset Button: Clears all settings

Forcibly switches the output relay ON immediately, bypassing all automated schedules.

Use the RESET key (often a recessed button) before first use to clear factory memory.