Redsail plotters commonly use a USB-to-Serial converter (often a CH340 or FTDI chip) to bridge the modern USB connection with the plotter's serial logic. This means you are rarely installing a "Redsail" driver directly, but rather a USB Serial Port driver that allows Windows to recognize the device. Windows 7, 8, 10, 11 (
: Most Redsail plotters use the FTDI chipset or the CH340/CH341 chipset. Download official drivers :
She clicked Open , then OK .
RedSail plotters use two main USB communication modes: redsail cutting plotter usb driver install
Extract the file, run SETUP.EXE , and follow the on-screen prompts. 4. Connecting and Verifying the Driver
Download the (often labeled as FT232R or VCP - Virtual COM Port driver) or the CH340 Driver , depending on your chipset.
Connect your Redsail plotter to the computer using the USB cable and power it on. Download official drivers : She clicked Open , then OK
Connect the USB cable to the plotter and then to your computer.
Once you know your chipset, download the official driver files. Avoid third-party driver update software, as these tools often bundle malware or install outdated, unstable driver versions.
Used in several newer or budget models. This is available at retailers like Sign-in-Global . Connecting and Verifying the Driver Download the (often
How to Install Redsail Cutting Plotter USB Drivers: A Complete Step-by-Step Guide
Click and select your Redsail model (e.g., RS720C, RS800C). If your exact model is missing, select Redsail HPGL or Generic HPGL . Go to the Link To or Sequential Port tab.