Onkyo Rc-799m Remote Manual 🎁 Must Try

Press and hold the button (like TV) and [DISPLAY] simultaneously for about 3 seconds until the button stays lit.

Hold down the button and the Display button simultaneously for approximately 3 seconds until the remote indicator light stays lit.

Connect the components using an RI cable (3.5mm mini-jack) alongside the standard audio cables. Point the RC-799M at the main Onkyo AV receiver. onkyo rc-799m remote manual

Hold down the DISPLAY button and the appropriate REMOTE MODE button (e.g., TV, BD/DVD, or CBL/SAT) simultaneously for roughly 3 seconds. The remote's indicator light will light up or blink.

Turns the main Onkyo AV receiver on or puts it into standby mode. Press and hold the button (like TV) and

While no longer in production, the RC-799M remains a highly functional, pre-programmed universal remote that can control up to (TV, DVD/Blu-ray, CD, VCR, Cable/Satellite, and the Onkyo receiver itself).

Below is a short table of common codes. For a full list, search for the “RC-799M code appendix” PDF. Point the RC-799M at the main Onkyo AV receiver

: Selects which device the remote currently commands. Middle Zone: Navigation and Volume

: Press and hold the appropriate REMOTE MODE button (TV, VCR/DVR, DVD, etc.) for 3 seconds. The remote indicator light will stay lit.