Mks Laser Tool Setup V112exe =link= Download Link File
Once you have safely acquired the verified MKS Laser Tool Setup V112.exe file, follow these steps to install and prepare your workspace: Step 1: Install CH340 USB Drivers
The software is designed to simplify complex technical tasks for both beginners and advanced users:
Are you trying to update the , or just looking to set up the Wi-Fi network ?
The tool will push the credentials to the board. Once connected, the board's screen (if attached) will display an IP address. You can now use this IP address to control your laser via web browsers, the MKS Laser Mobile App, or LightBurn via an Ethernet/TCP connection. 3. Laser Image Conversion For quick engraving jobs without LightBurn: Select the inside the application. Import a JPEG, PNG, or BMP image. Adjust the contrast, brightness, and sizing parameters. Choose your engraving style (e.g., Grayscale or Dithering). mks laser tool setup v112exe download link
: Ensure your router is broadcasting a 2.4 GHz signal. Most ESP32-based control boards do not support 5 GHz networks.
Modify laser settings, baud rates, and machine movement parameters.
Try running the tool as an Administrator. Once you have safely acquired the verified MKS
: Ensure the laser board is powered via an external power supply; USB alone may not provide enough power for firmware updates. 2. Installation Steps Download : Obtain the .exe file from the GitHub tool folder.
Before launching the tool, your computer must be able to recognize the MKS DLC32 board via USB. Most MKS boards use the CH340 USB-to-Serial chip.
Click and select your firmware file (usually ending in .bin ). Click the Start or Flash button. You can now use this IP address to
Follow these steps to safely install the tool on a Windows operating system:
Version 1.1.2 stabilizes communication between your PC and the engraving mainboard [1]. Supported Operating Systems Windows 7 (32-bit / 64-bit) Windows 8 / 8.1 Windows 10 Windows 11 (Run in compatibility mode if required) Compatible Hardware MKS DLC32 (V1.1, V2.0, V2.1) [1] MKS DLC V2.0 / V2.1 (8-bit boards) [1] TS24 / TS35 Touch Screens [1] Step-by-Step Installation Guide
Convert standard image files into laser-ready G-code data. 2. Where to Download MKS Laser Tool Setup V1.12.exe