Maintenance Box Resetter For Epson L6170 Best ✦

Some resetters require you to connect a USB cable to a computer and run a small reset utility after the chip is installed. Always follow the instructions provided with your specific resetter.

Reinsert the box. The printer should now recognize it as empty.

Disclaimer: Resetting the waste ink counter does not technically remove the ink from the sponge. Always manage the physical waste to prevent printer damage. If you want, I can: maintenance box resetter for epson l6170

WICReset can also be used to reset the maintenance box counter if the physical chip replacement method is not an option for you.

: Press and hold the resetter against the chip. An indicator light will typically glow red and then turn green to signify a successful reset. Some resetters require you to connect a USB

Unscrew the single retaining screw and slide the T04D1 box out.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. The printer should now recognize it as empty

Align the metal pins of the resetter tool with the gold contacts on the T04D1 chip. Press the resetter firmly against the chip contacts. Watch the built-in LED light on the resetter tool:

Is your printer currently or just showing a low ink warning ? Do you already own a hardware resetter tool , or

Reusing the plastic box is better for the environment than throwing it away.