| Code | Meaning | Action | |------|---------|--------| | E01 | Sensor out of range | Recalibrate or service | | E02 | Power supply unstable | Check voltage | | E03 | Overtemp | Let cool 30 min | | E04 | Comm failure | Check internal cable (service) | | E05 | Calibration invalid | Repeat calibration |
: Requires the use of an optional APRB oscillating curved arm accessory for smooth articulation.
The Life Probo PR70 system requires systematic safety validation at least : | Code | Meaning | Action | |------|---------|--------|
The runner must be aligned and level, parallel to the ceiling Peiter Automatic Sectional Doors
: 230V AC (50Hz) input with a 24V DC internal motor operation. If you need to customize any part of
to output terminals to signal door movement.
If you need to customize any part of this layout, let me know: | Code | Meaning | Action | |------|---------|--------|
pre-coded for immediate post-installation system testing. Main Components
Ensure 230V power wires are physically segregated from low-voltage lines inside the housing to suppress signal interference.