Leica Tcr805 Total Station User Manual Work ^new^ < EASY 2026 >

Turn the third footscrew (Screw C) to adjust the Y-axis sensor until it also reads zero.

Before measuring, configure the internal settings to match your project requirements. Access Settings : Press the

Ensure your newly created job is selected as the active file for both data storage and coordinate readouts. Step 3: Station Setup (Orientation and Backsight)

The TCR805 includes internal memory and interface options for external data handling: leica tcr805 total station user manual work

: To configure for external software like Carlson SurvCE , hold the Menu button for 2 seconds, navigate to Rec Data or Communication Parameters , and set the Baud rate (e.g., 19200) and Parity. Integrated Software Programs

Loosen the central fixing screw slightly. Slide the instrument across the tripod head until the laser dot is perfectly centered on your ground nail or monument. Tighten the screw.

Once the circular bubble is centered, the instrument is coarsely level, and the laser plummet should still be hovering very close to your ground point. Turn the third footscrew (Screw C) to adjust

: Use the physical circular bubble for rough levelling, then the digital level bubble on the screen for precise adjustment until three "thumbs up" icons appear.

The TCR805 features a user-friendly layout with a large, high-resolution LCD screen and a 31-key alphanumeric keypad. Key buttons include:

Always store the instrument in its carrying case when moving around the site. Step 3: Station Setup (Orientation and Backsight) The

Method 2: Set Orientation by Coordinates (Resection / Backsight Point)

Turn on the instrument. The laser plummet will activate automatically.