La-e801p Rev 2.0 Schematic -

You need the Rev 1.0 schematic. The Rev 1.0 board is a Sky Lake-U base, while the Rev 2.0 is a Kaby Lake platform. The physical components and pin connections are likely different, making them incompatible.

: 19V was present at the DC jack. The "front door" was open.

: Governed by a memory controller chip (such as the G5616B PWM IC on PUM1) to power DDR4 modules. : Multi-phase buck regulators that scale from la-e801p rev 2.0 schematic

: Following the schematic to the charging circuit, he found a charred resistor, PR702. It was supposed to be 10 ohms; it was now an infinite void. The Resurrection 💡

: 2.0 (dated approximately late 2016 to early 2017). Key Components Mapped in the Schematic You need the Rev 1

Shows logic relationships, component ratings, and voltage node structures.

Repair technicians frequently seek the Rev 2.0 schematic to solve these recurring hardware failures: : 19V was present at the DC jack

: Supports Intel Kaby Lake-U processors.

: A tiny capacitor, PC1024, sits right on the edge of the CPU power rail. The Investigation