Link | Iec 6193612021

Moderátoři: zick-zack, Spede

Link | Iec 6193612021

The 2021 revision aligns better with digital substations. It addresses the installation of non-conventional instrument transformers (NCITs) and electronic current/voltage sensors, which require different physical mounting and shielding considerations compared to traditional oil-paper insulated transformers.

The 2021 revision introduced several improvements to modernize safety protocols and clarify technical requirements: Insulation Coordination:

is a critical international standard titled: "Power installations exceeding 1 kV a.c. – Part 1: Common rules"

The standard enforces strict structural design principles to eliminate flashover risks and accidental physical contact. It specifies minimum air clearances based on the system's rated impulse withstand voltage. For indoor sub-stations, the baseline clearance demands at least the danger zone dimension plus 200 mm (minimum 500 mm), whereas outdoor setups mandate a threshold of the danger zone plus 300 mm (minimum 600 mm). 2. Earthing Systems and Touch-Voltage Limits iec 6193612021 link

The 2021 revision introduced significant updates to align the standard with modern engineering practices, advancements in equipment design, and evolving safety philosophies. Key modifications include:

to the official IEC 61936-1:2021 standard page.

The standard has clarified the requirements for connections for temporary protective earthing (TPE). These are the connection points where maintenance crews attach portable earthing devices to de-energize lines. The 2021 version specifies stricter guidelines on the mechanical strength and placement of these connection points to protect workers during maintenance. The 2021 revision aligns better with digital substations

Standardizing clearances and insulation levels. Key Changes in the 2021 Edition

The 2021 release replaced the older 2010 edition (and its 2014 amendment). Understanding these changes is critical for compliance on modern engineering projects.

Navigating IEC 61936-1:2021—The Benchmark for High-Voltage Power Installations – Part 1: Common rules" The standard enforces

IEC 61936-1:2021, officially titled , is published by the International Electrotechnical Commission (IEC). It provides comprehensive requirements for the design and erection of electrical power installations in AC systems with nominal voltages exceeding 1 kV and a nominal frequency up to and including 60 Hz. The standard ensures both safety and proper functioning for the intended use of the installation.

Power installations within industrial premises.

Do you need help calculating specific parameters like or transformer fire separation distances ?