Counterorange Light Blinking Link: How To Reset Epson L382 Waste Ink Pad

If you skip this, ink may drip inside the printer and damage the mainboard.

Epson printers use absorbent pads (waste ink pads) to collect excess ink during printhead cleaning, borderless printing, and other maintenance cycles. Over time, the internal counter tracking these cycles reaches a pre‑programmed threshold. Unlike a physical sensor, this is an estimate; the pads may not be fully saturated but the printer locks itself as a safety measure.

You will need to purchase a (usually around $10 USD) to complete the process. 5. Physical Maintenance: The "Real" Waste Ink Issue If you skip this, ink may drip inside

Check the boxes for and Platen pad counter . Click Check to verify they are at 100%. Click Initialize to clear the counter to 0%.

: The printer does not contain a physical sensor to monitor how wet the foam is. Instead, it relies on a digital internal counter that calculates ink volume mathematically. Unlike a physical sensor, this is an estimate;

Resetting the counter tells the printer "the pad is empty," allowing you to print again. However, the physical pad is still full of ink. If your printer is showing this error for the second or third time, you should consider having the waste ink pads physically replaced or installing an external waste ink tank to avoid leakage.

Comprehensive Guide: How to Reset Epson L382 Waste Ink Pad Counter and Fix Blinking Lights Physical Maintenance: The "Real" Waste Ink Issue Check

Click on the button labeled on the right side of the main window. How to Reset Ink Pad Epson L382, Epson L386 Printer?