Gunnebo Speedstile Fl Installation Manual Jun 2026
Mark the bolt hole positions through the cabinet base frame templates. Move the cabinets aside slightly, drill holes to the specified depth, and clear out all concrete dust.
Have one person present a valid card and enter the lane. Have a second person follow closely behind without badging. The internal alarm should sound, and the wings should attempt to close or remain closed to block the second user.
Heavy tempered or laminated glass panels wrapped in protective foam. gunnebo speedstile fl installation manual
across the footprint), and capable of supporting a minimum load of per cabinet.
Walk through the lane without presenting a card to test the anti-tailgating and intrusion alarms. Mark the bolt hole positions through the cabinet
is a high-end, fast-acting speed gate designed for secure, authorized access control in areas with high pedestrian traffic. Proper installation is critical to ensure the longevity, security, and smooth operation of these automated entrance systems.
Drill the anchor holes to the depth specified by the anchor manufacturer (usually 80mm–100mm). Have a second person follow closely behind without badging
depending on glass thickness) to prevent slippage during fast braking cycles. 6. Commissioning and Calibration
You’re not just bolting down a lane. You’re building the first line of defense for an office, stadium, or transit hub. The SpeedStile FL is sleek, fast, and unyielding—but only if you install it right. Let’s get that glass wing moving like it means it.
Perhaps the most technically demanding aspect of the installation, covered in the latter half of the manual, is the electrical integration and parameter configuration. The Speedstile FL is not a standalone gate; it is a node in a broader access control network. The manual details the wiring diagrams for connecting the turnstile to fire alarm systems (for emergency escape), power supplies, and the client’s Access Control System (ACS).
The Gunnebo SpeedStile logic board accepts volt-free (dry contact) signals for authorization commands.