The software will cycle through several stages: Erasing, Low-Level Formatting, Testing Blocks, and Writing Firmware . This process can take anywhere from 2 minutes to over an hour depending on the physical capacity and speed of the NAND flash. 6. Verify Success
Always plug the target flash drive into a native USB 2.0 port (usually black) directly on your motherboard (back of the PC). Avoid USB 3.0 ports (blue) or external USB hubs, which cause command timeouts.
These controllers are commonly found in:
Because firmware bundles are updated to support newer batches of NAND flash memory, you should generally look for the newest version available, or a version whose release date closely matches the manufacturing date of your USB drive. Choosing Between MpTool and APTool: firstchip fc1178bc firmware
: Since these tools are often distributed on unverified forums, always scan downloads with updated antivirus software.
He opened the drive properties.
These are free, portable utilities that read the low-level hardware descriptors of plugged-in USB devices. is highly recommended for FirstChip devices. The software will cycle through several stages: Erasing,
This comprehensive guide covers everything you need to know about locating, selecting, and flashing firmware for the FirstChip FC1178BC controller. Understanding the FirstChip FC1178BC Controller
Before you do anything else, you must confirm that your drive indeed uses an FC1178BC controller.
: Highly recommended for FC1178BC controllers, especially for recovering the true capacity of fake drives. Version V1.0.5.2 (2022-06-01) Verify Success Always plug the target flash drive
: Click Start or OK and wait for the progress bar to complete. If it finishes with a green label, the drive is repaired. Common Troubleshooting
Once the computer plays the connection sound, remove the short circuit immediately.