Ericsson Mini Link Cli Commands ((exclusive)) <2025>

To begin, establish a connection via Telnet or SSH (default password is often

Before executing commands, you must establish a secure connection to the Traffic Node (TN) or Packet Terminal (PT). Establishing a Connection

Access is typically established via (recommended for security) or Telnet over a LAN or management connection. Default Connection Details : IP Address : Often 10.0.0.1 for local craft port access. Default Credentials : User : admin or admin_user Password : ericsson or Ericsson@123 Privilege Levels : ericsson mini link cli commands

Product name (e.g., MINI-LINK 6352), serial number, software version, uptime, temperature, and power supply status.

: Type configure terminal to enter global configuration mode. To begin, establish a connection via Telnet or

The is the ultimate mechanism for network engineers requiring precision, speed, and deep system diagnostics when provisioning microwave backhaul hardware. While graphic applications like MINI-LINK Craft are adequate for localized provisioning, the CLI unlocks advanced management capabilities across the Ericsson MINI-LINK portfolio. It provides deep control over the Traffic Node (TN) series and modern packet platforms like the MINI-LINK 6600 and E-band 6352 systems.

: Displays a complete list of installed hardware modules, including plug-in units, serial numbers, and product numbers. Default Credentials : User : admin or admin_user

| Command | Function | | :--- | :--- | | | Enter global configuration mode from user EXEC mode. | | write mem | The most critical command for configuration. It saves the current running-config to the startup-config , making changes permanent across reboots. | | set switchport | Used to configure Ethernet switch ports, including VLAN membership, speed, and duplex. | | add vlan / remove vlan | Commands to create or delete VLANs on the Ethernet switch. | | sync vlan | Used to synchronize VLAN configurations, often applied via management platforms. | | no ... | Prepend no to any configuration command to disable or remove a feature. For example, no rsyslog enable disables syslog forwarding. |

The MINI-LINK CLI is structured into several functional groups. Mastering these will allow you to perform virtually any management task.