Equatech Universal Tv Wall Mount 32 To 100 Instructions Site

If your Equatech model uses , slide the long metal bar horizontally through the bottom loops of the brackets until it bridges the entire mount.

For TVs 32 to 100 inches, common VESA patterns include:

Set the wall plate aside. Using an electric drill with a 5/32" (or 4mm) wood drill bit , drill four pilot holes into the stud marks to a depth of about 2.5 inches.

(A level is usually built into the Equatech wall plate, but a standalone one confirms accuracy) Tape measure equatech universal tv wall mount 32 to 100 instructions

Line up the wall plate with the anchors, insert the lag bolts through the washers and plate, and tighten them down securely with your socket wrench. 4. Hanging the TV and Safety Lock Engagement

: Select the correct size bolts from the hardware kit. Use spacers if the TV has a curved back or if the bolts are too long.

Every few months, gently pull on the sides of the TV bracket to ensure everything remains tight. Temperature shifts can sometimes cause structural materials to expand or contract slightly. If your Equatech model uses , slide the

Equatech includes a paper template or cardboard guide. Tape it to the wall at your marked height, aligning the holes with stud centers. Use a level to ensure it’s straight. Mark all bolt holes through the template.

If your model features safety screws: Look beneath the bottom rail of the mount. Use a long Phillips head screwdriver to tighten the safety screws upward until they lock firmly behind the bottom lip of the wall plate.

If your model has pull-strings: Listen for a clear click sound when you rest the bottom of the TV against the mount. Pull lightly on the bottom of the television to ensure it is locked into place. You can tuck the strings behind the TV out of sight. (A level is usually built into the Equatech

Once securely attached, check your work one last time. If your Equatech mount is a tilting model, you can carefully loosen the side tension knobs on the bracket arms by hand, adjust the screen down to reduce glare, and retighten the knobs.

Equatech mounts often include cable clips or channels. Route HDMI, power, and audio cables through the wall plate opening or along the arms. For a professional look, use an in-wall cable management kit (required for fire safety in some regions).