DRGEM X-Ray Service Manual Install: GXR-Series Technical Guide
Access the service mode on the control console and select the exact X-ray tube model installed. This loads the pre-programmed thermal characteristics and limits.
Follow these steps carefully:
Clean the HV cable plugs and tube/generator receptacles with anhydrous alcohol.
If you need to resolve specific installation issues, tell me: drgem x ray service manual install
Maintain at least 3.2 feet (1 meter) of clearance around the generator and diagnostic table for service access. Floor Levelness: The floor must be level within ±plus or minus
Connect the hand switch, foot switch, and door interlock safety circuits to the designated terminal blocks on the generator control board. If you need to resolve specific installation issues,
X-ray generators contain lethal high voltages (up to 150 kV). Never attempt installation or servicing while the unit is powered on. Only qualified service personnel should perform these tasks.
Connect the main cabling between the tube head and the generator cabinet. 4. Configuring the GXR Generator (Service Mode) Never attempt installation or servicing while the unit
Steps for Let me know which topic you'd like to explore next. GXR-C Series Quick Installation Guide | PDF - Scribd
The floor must support a minimum weight density of 500 kg/m² for fixed systems.