Disco 240 Dmx Controller Manual [ Windows ]

Before switching on, it is essential to follow these steps to protect the controller's electronics.

Manually adjust DMX values for the selected scanner's attributes (e.g., color, gobo, intensity).

so the console knows which faders correspond to which light. Fixture 1: Address 001 Fixture 2: Address 017 Fixture 3: Address 033 Fixture 4: Address 049 If you want multiple lights to do the exact same thing , set them all to the same address (e.g., all set to 001). 📝 How to Program a Scene is a single "look" or static snapshot of your lights. Enter Edit Mode: Press and hold the Program/Edit button until the indicator light flashes. Select Fixtures: Scanner buttons (P1–P12) for the lights you want to adjust. Adjust Levels: Faders (CH1–CH8) to set colors, brightness, or position. Page Select to access channels 9–16. Save the Step: ) button, then select a Scene button (1–8) or Bank location to store it. button again to save and exit. 🏃 Creating a Chase is a sequence of scenes that play back in order. and select a Chase button (1–12) disco 240 dmx controller manual

Press Auto/Del to activate automatic scene changes. Adjust Speed and Fade Time faders to control the tempo.

Toggle the rear DMX polarity switch if the fixture uses an inverted pinout. Reverse Pan or Tilt Controls Before switching on, it is essential to follow

Set the dip switches or digital display on your lights to these specific addresses. Once addressed, press the on the controller to begin controlling that specific light. 3. Manual Operation and Faders

Select scenes manually by pressing the Scene buttons in a bank. 6. Troubleshooting and Technical Tips Fixture 1: Address 001 Fixture 2: Address 017

Select your desired and Scene using the navigation buttons.

The Speed fader controls how long a step in a chase stays active. The Fade Time fader determines how smoothly the lights transition from one look to the next. Understanding DMX Addressing on the Disco 240