Commax Dp-ra01 Installation Manual !free!

The DP-RA01 does not include a power brick. You must provide:

Simultaneous duplex communication via handset. Mounting Type: Surface-mount wall bracket. Dimensions: Approximately 108(W) × 210(H) × 61(D) mm. Tools and Materials Required Before starting, gather the following equipment: Philips head screwdriver Wire strippers and cutters Digital multimeter (to verify voltage and continuity) Electric drill and appropriate wall anchors

Align the slots on the base of the handset with the hooks on the wall bracket and pull the unit down slightly to secure it.

The DP-RA01 is designed to work with various Commax outdoor door stations, including: : DR-2G , DR-2K , DR-201D , and DR-2A2N . Key Specifications Feature Power Source AC 100-240V, 50/60Hz Wiring 2-wire (Door Station), 2-wire (Door Release) Mount Type Surface mount Functions Audio talk with visitor, door release button User Manual commax dp-ra01 installation manual

outlet, which eliminates the need for an external DC power transformer in many configurations. Door Release Function

: The manual clearly outlines the 2-wire connection for electric door locks. Note that for most standard setups, the door release button on the handset triggers the lock through these dedicated terminals. Key Specifications at a Glance Power Source AC 100-240V, 50/60Hz 2-wire (Door Station), 2-wire (Door Release) Max Distance 100m (Ø0.65mm) to 150m (Ø0.8mm) Surface Mount type with included bracket While functional, the instruction manual

: Screw the mounting bracket firmly to the wall at a comfortable height (usually around 145cm from the floor). The DP-RA01 does not include a power brick

Ensure the handset cord is plugged securely into the base unit port. Step 5: System Testing

relies on simple, low-voltage wiring layouts. Review the diagram options below depending on your hardware environment. 1. Single Door Station to Handset (Standard 2-Wire)

Route one wire from the external power supply directly to the electric lock. Dimensions: Approximately 108(W) × 210(H) × 61(D) mm

to connect the door station (DR-2K or similar) to the room station. These are typically non-polar, but check your specific unit's diagram to be sure. Power Source : Connect the AC power cord (available for models like ) to a standard outlet. Door Release (Optional)

To represent mathematical formulas we use $$ syntax. For instance, in case of describing $$y = 3x + 2$$ we keep it as is, without any changes.

Run a sequentially from the master handset to the subordinate sub-handsets.