Achi Ir6500 Software ((free)) Jun 2026
: Some users have reported the PC410 controller displaying a negative integer for temperature, decreasing as the station heats up. This points to a hardware issue, likely an incorrectly connected thermocouple. Check that the thermocouple wire is connected with the correct polarity (+ to +, - to -).
The original Achi software was built for Windows XP and 7. To run it on modern systems: Right-click the .exe file. Go to .
Installing the requires administrative privileges.
A standard BGA rework profile consists of four distinct software-controlled phases: achi ir6500 software
Running the hardware without a programmed software profile risks blistering PCBs, delaminating substrates, or popcorn-damaging sensitive silicon chips. You must customize your software segments based on the alloy type. Recommended Lead-Free (Sn-Ag-Cu / SAC305) Profile
If you need help building a specific profile, tell me you are repairing (e.g., PS4, laptop, iPhone) and whether you are using leaded or lead-free solder . I can provide the exact temperature and timing parameters for your software script! Share public link
ACHI IR Soft was engineered during the Windows XP/7 era. You must run the application with Administrator privileges and toggle Windows 7 Compatibility Mode in the file settings. 4. Real Temperature Lags Behind the Software Curve : Some users have reported the PC410 controller
Don't like the "Rainbow" color scheme? Use the software to switch the saved image to:
Once installed, open your Windows and check under Ports (COM & LPT) . Take note of the assigned port number (e.g., COM3). Step-by-Step Software Installation
Yes. If you own the camera, the software is provided free of charge as a license-free download. There are no subscription fees. The original Achi software was built for Windows XP and 7
Ensures a fine grain structure in the solidified solder joints, avoiding brittle connections. 4. Troubleshooting Common Software Errors Root Cause Actionable Solution "Communication Timeout" or "Port Closed" Incorrect COM Port allocation or faulty driver.
Some users have reported that the Altec PC410 controller displays a negative temperature reading, or one that goes down as the temperature goes up.
